V26S01-23AGV Camloc slotted recess pan head stud
Camloc 2600 series quarter turn stud with slotted head and length number 23
partnumber
V26S01-23AGV
To request or order this product, please fill in the desired quanity below and press the ‘add to list’ button.
- Stud length number: 23
- Total stud length: 36,0 mm
- Slotted recess pan head for flat-blade screwdriver
- Material: Steel
- Surface: Zinc-plated, CrVI-free, clear passivation
- Maximum tensile strength: 1330 N
- Working load: 900 N
- Maximum operating temperature: 120 °C
Stud length number 23 is to be used with a total thickness T = 17,50mm to 18,30mm.
The total thickness of your application depends on the style of receptacle you are using. Please check the drawing below to see how you can determine the total thickness of your application. If you do not know which length number you require, please go to our information page about Camloc 2600 series. There you can determine all partnumbers you need for your application.
Compatible partnumbers:
cross recess pan head
- Camloc V26S02-23AGV : steel zinc plated
- Camloc 26S8-23D : steel zinc plated
- Camloc 26S39-23 : steel nickel plated
- Camloc 26S8-23 : steel cadmium plated
- Camloc 26S51-23 : stainless steel
- Turnlock MTHTLC-23Z : steel zinc plated
- Turnlock MTHTLC-23N : steel nickel plated
- Turnlock MTHTLC-23S : stainless steel
- Monadnock / Lisi 1126004-23 : steel cadmium plated
- Monadnock / Lisi 1126008-23 : stainless steel
slotted recess pan head
- Camloc V26S01-23AGV : steel zinc plated
- Camloc 2600-23D : steel zinc plated
- Camloc 26S42-23 : steel nickel plated
- Camloc 2600-23 : steel cadmium plated
- Camloc 26S38-23 : steel chrome plated
- Camloc 2600-23S : stainless steel
- Turnlock MTHTLS-23Z : steel zinc plated
- Turnlock MTHTLS-23N : steel nickel plated
- Turnlock MTHTLS-23C : steel chrome plated
- Turnlock MTHTLS-23S : stainless steel
- Monadnock / Lisi 1126000-23 : steel cadmium plated
- Monadnock / Lisi 1126007-23 : stainless steel
Camloc V26S01-23AGV drawing
Go to our downloads section to get our most recent catalogues.
In these catalogues you will find all the spec sheets with dimensions and drawings.
Retaining washers for Camloc® 2600 series studs
2600-SW
floating retaining washer
Stainless steel floating retaining washer for Camloc® 2600 series quarter turns.
This retaining washer is to be used when the stud length number is 5 or greater.
Below you can see how to prepare the panel depending on the panel thickness.
A floating retaining washer is often used with larger stud lengths. Also when the panel is curved it is easier to install the panel when the stud can move freely
V2600-LW-7
fixed retaining washer
Stainless steel fixed retaining washer for Camloc® 2600 series quarter turns.
This retaining washer can be used with all the different stud length numbers.
Below you can see how to prepare the panel depending on the panel thickness.
This washer works very well with rather flat panels. Also with (thin) panels of glass or carbon fiber it prevents damage as the stud always stays in place.
The rivet holes are 2,6mm so installation can be done with 2.4mm (or 3/32″) diameter rivets.
For V212-12-1FGV, the rivet holes are 2,5mm so installation can be done with 2.4mm (or 3/32″) diameter rivets.
To prepare the bottom panel B for the receptacle, please follow these steps:
Installation 
