V26S02-32AGV Camloc cross recess pan head stud

Camloc 2600 series quarter turn stud with philips head and length number 32

Camloc®

Camloc 2600 series V26S02-32AGV quarter turn fastener

partnumber

V26S02-32AGV

To request or order this product, please fill in the desired quanity below and press the ‘add to list’ button.

  • Stud length number: 32
  • Total stud length: 42,9 mm
  • Cross recess pan head for PH2 screwdriver
  • Material: Steel
  • Surface: Zinc-plated, CrVI-free, clear passivation
  • Maximum tensile strength: 1330 N
  • Working load: 900 N
  • Maximum operating temperature: 120 °C

Stud length number 32 is to be used with a total thickness T = 24,40mm to 25,15mm.

The total thickness of your application depends on the style of receptacle you are using. Please check the drawing below to see how you can determine the total thickness of your application. If you do not know which length number you require, please go to our information page about Camloc 2600 series. There you can determine all partnumbers you need for your application.

Compatible partnumbers:

cross recess pan head

  • Camloc V26S02-32AGV : steel zinc plated
  • Camloc 26S8-32D : steel zinc plated
  • Camloc 26S39-32 : steel nickel plated
  • Camloc 26S8-32 : steel cadmium plated
  • Camloc 26S51-32 : stainless steel
  • Turnlock MTHTLC-32Z : steel zinc plated
  • Turnlock MTHTLC-32N : steel nickel plated
  • Turnlock MTHTLC-32S : stainless steel
  • Monadnock / Lisi 1126004-32 : steel cadmium plated
  • Monadnock / Lisi 1126008-32 : stainless steel

slotted recess pan head

  • Camloc V26S01-32AGV : steel zinc plated
  • Camloc 2600-32D : steel zinc plated
  • Camloc 26S42-32 : steel nickel plated
  • Camloc 2600-32 : steel cadmium plated
  • Camloc 26S38-32 : steel chrome plated
  • Camloc 2600-32S : stainless steel
  • Turnlock MTHTLS-32Z : steel zinc plated
  • Turnlock MTHTLS-32N : steel nickel plated
  • Turnlock MTHTLS-32C : steel chrome plated
  • Turnlock MTHTLS-32S : stainless steel
  • Monadnock / Lisi 1126000-32 : steel cadmium plated
  • Monadnock / Lisi 1126007-32 : stainless steel

Camloc V26S02-32AGV drawing

Camloc 2600 series V26S02-32AGV quarter turn fastener with cross recess pan head

Go to our downloads section to get our most recent catalogues.
In these catalogues you will find all the spec sheets with dimensions and drawings.

Retaining washers for Camloc® 2600 series studs

2600-SW
floating retaining washer

Stainless steel floating retaining washer for Camloc® 2600 series quarter turns.

Camloc 2600 series 2600-SW retaining washer drawing

Camloc 2600-SW retaining washer

This retaining washer is to be used when the stud length number is 5 or greater.

Below you can see how to prepare the panel depending on the panel thickness.

A floating retaining washer is often used with larger stud lengths. Also when the panel is curved it is easier to install the panel when the stud can move freely

V2600-LW-7
fixed retaining washer

Stainless steel fixed retaining washer for Camloc® 2600 series quarter turns.

Camloc 2600 series V2600-LW-7 retaining washer drawing

Camloc V2600-LW-7 retaining washer

This retaining washer can be used with all the different stud length numbers.

Below you can see how to prepare the panel depending on the panel thickness.

This washer works very well with rather flat panels. Also with (thin) panels of glass or carbon fiber it prevents damage as the stud always stays in place.